The 117 cm double blade central cutter bar with its action has a mulch cut mode and is fitted with two blades running in opposite direction. This “scissor like” cutting action reduces the vibrations on the handlebar when mowing ensuring an optimum quality cut in all conditions.
Thanks to its characteristics the central 117 cm double blade cutter bar is ideal for cutting in rustic areas, fruit orchards, or produce grass for animal feed. 

The grass disperser is mounted on vibration-proof rubbers, has a special profile to better grass dispersal in the most demanding situations: the cut grass is taken and dropped on the ground by the action of the wheels allowing easier control when travelling forwards.

High quality blades are made from heat treated steel and the blade tensioners made of flexible material to ensure contact between the two blades.

The GF3’ s weight distribution has been designed to increase its stability when mowing on slopes. In order to further increase the stability Grillo has a wheels extension kit available to enlarge the track up to 24 cm, a highly adherent tyre profile design as well as a laterally adjustable handlebar.

The gearbox has 3 forward and 3 reverse gears of the Grillo GF3 and has been designed to obtain mowing speed ideal for cutting when fitted with the “Tractor” wheels 4.00-8, i.e. 1.1, 2.6 and 4.3 km/h.
In order to produce an even cut, the cutter bar to allow for any ground undulations.
The handlebar is mounted on vibration-proof rubbers which dampen the vibrations also laterally.
The handlebar is laterally adjustable for use on slopes and height adjustable to meet all user requirements. It is also reversible and can be lowered to considerably reduce the machine’s size.
All controls are in a comfortable position, handlebar adjusting levers included.

Grillo has a vast accessory range in order to enhance the use of the GF3, such as the 75 cm rotary cutter with blade brake, the 68 cm all purpose flail and for winter use, the 125 cm orientable snow blade as well as the 70 cm two stage snow thrower.

Painting of Grillo machines consists of a double electrostatic powder coated process. At the beginning there are the washing baths and the preparation, then a first protective coat is applied together with the baking in the oven, turns out to be the best basis for the application of the finishing. The second coat consisting of varnish and a further baking in the oven at 190°C convey the characteristic hardness and brilliance.
All GF3 have been mounted with care for every detail and tested scrupulously by specialised personnel. Final inspection means also machine with started-up engine in order to check the functionality. This is a further and final guarantee for a high quality product.